Broomfield Gatesand Bespoke Joinery, East Goscote Book a survey

Made to fit the gap.

Bespoke timber gates in softwood and hardwood, any size, any colour. Here is what they make, and roughly what it costs.

Wide boarded timber driveway gatesTimber driveway gates set into a stone wall

Driveway gates

A pair made to the width of your opening and hung on heavy hinges. Hardwood for a gate that lasts, treated softwood when the budget matters more.

  • Ledged and braced, framed, boarded or slatted
  • Flat, arched or dipped top
  • Coded lock or an electric opener
  • Oak or softwood posts, set properly
Design one
Anthracite painted side gate between brick wallsTreated softwood side gate with galvanised hinges

Side gates

For the passage down the side of the house, made to the exact gap, however awkward. Tall for privacy, or shorter for a garden path.

  • Made to the gap, not off a shelf
  • Painted to match your door and brick
  • Ring latch, coded lock or bolt
  • Fitted level, so it closes without a slam
Design one
Willow green painted double gates with a black ring handleBlue-grey painted braced double gates

Painted and bespoke

Any colour you like. Willow green, anthracite, harbour blue and chalk are the ones customers have chosen in their photos. Slim frames, arched tops and slatted designs are all on the table.

  • Sage, grey, blue, black or your own colour
  • Slim-framed and slatted designs
  • Cream or white to match window frames
  • Digital coded lock on request
Design one
Close-boarded fence and gate beside a resin driveCream painted gate beside a close-boarded fence

Fencing and posts

Google lists them as fence contractors, and the photos show fence runs built to match the gate. A fence and gate that agree look like they were always meant to be there.

  • Close-boarded and featheredge fencing
  • Posts in oak or softwood
  • Gate and fence in one visit
  • Ask about your boundary
Design one

Field gates and openers.

Five-bar and boarded field gates, sized to the opening. A recent Facebook post shows a gate stained in oak and finished in linseed oil, made for an electric field gate motor.

Electric openers are in the designer as an option so you can see the guide price. Whether the team fit the motor themselves or work with an installer is for them to confirm when they visit.

Design a field gate

Which timber?

General guidance, not a promise about any one job. Their own advice at the survey comes first.

Softwood

Treated softwood is the everyday choice: quick to make, takes paint well, lowest price. Left natural it weathers to a silver grey.

Iroko

A dense, oily hardwood that shrugs off the weather. Golden brown, darkening with age. A customer described its grain as beautiful and the finish as precise.

Oak

The classic. Heavy and strong, used for statement gates and for posts. Oil it to keep the warm colour.

What things roughly cost.

These come from the same guide the designer uses. They are our estimates, not Broomfield's prices. The real figure comes after they measure up.

JobWhat is in itRough guide
Side gate, 0.9 m by 1.8 mTreated softwood, ledged and braced, natural, keep your posts
Side gate, 1.0 m by 1.9 m, paintedSoftwood, framed and boarded, willow green, new softwood posts
Driveway pair, 3 m wideSoftwood, ledged and braced, painted anthracite
Driveway pair, 3 m wideIroko, plain boarded, oiled, new oak posts
Driveway pair, 3.6 m wideOak, framed and boarded, arched top, electric opener
Field gate, 3.6 m wideOak, five-bar, oiled, new oak posts

Guide prices include making, finishing, posts where chosen, and fitting. Electric openers are supplied and fitted only if the team confirm they do that. Ranges run from about 12% under to 16% over our midpoint.

Not sure which gate?

Design one and send the spec. Or send a photo of the gap and ask.